topic Re: Doosan Mill/Turn (Lynx) post tweaking advice please in HSM Post Processor Forum

Doosan Mill/Turn (Lynx) post tweaking advice please

Stephen__Hall — Tue, 28 Jan 2020 15:24:24 GMT

Hi all

I've (up to now) successfully made a few modifications to a Doosan Mill/Turn post but the operator has asked for an adjustment to the Tool numbering and I'm stumped. The codes we've always used for the tool call (turning tools) is T0101, T0202 etc. and a standard T03 for a milling tool. The issue we're having is that the post is outputting T0100, T0200 etc. for the turning tools. The program runs fine but the operator can't see the tool in his simulation and, understandably, in future would like to see what the program does before hitting the start button if I'm not around!

Thanks in advance

Re: Doosan Mill/Turn (Lynx) post tweaking advice please

Anonymous — Tue, 28 Jan 2020 15:47:31 GMT

Make sure your compensation offset in the tool library isn't set to 00.

Re: Doosan Mill/Turn (Lynx) post tweaking advice please

Stephen__Hall — Tue, 28 Jan 2020 15:54:04 GMT

Ahhh.....of course. I spent that long poking around in the post I didn't stop to think logically for a second. Thank you!

Re: Doosan Mill/Turn (Lynx) post tweaking advice please

Anonymous — Tue, 28 Jan 2020 22:16:54 GMT

No Problem.

Sometimes it is easy to miss the simple things.

Steve