Error: Compensation offset is out of range.

Anonymous — Wed, 11 Mar 2020 14:45:05 GMT

Hello,

When i try to post-process a part which has to be made at our company, i get the following message:

I get this message when i use a "in computer" compensation when finishing a part.

When i use the " in control "option this error does not occur & the post processor runs correctly.

anyone who has encountered this aswell?

anyone who knows how to get rid of this issue?

...
Code page changed to '1252 (ANSI - Latin I)'
Start time: Wednesday, March 11, 2020 2:32:23 PM
Code page changed to '20127 (US-ASCII)'
Post processor engine: 4.5609.0
Configuration path: C:\Users\Public\Documents\Autodesk\Inventor CAM\Posts\haas turning.cps
Include paths: C:\Users\Public\Documents\Autodesk\Inventor CAM\Posts
Configuration modification date: Tuesday, February 11, 2020 12:05:06 AM
Output path: C:\Users\PhilippeB\AppData\Local\Inventor CAM\nc\uitleg 3.nc
Checksum of intermediate NC data: 65d55afb89c71204e38acf97ad744ae4
Checksum of configuration: 3faf3e93e18bb6ea5d6a4f907caa6123
Vendor url: https://www.haascnc.com
Legal: Copyright (C) 2012-2019 by Autodesk, Inc.
Generated by: Inventor CAM Ultimate 7.3.1.20023
...
Warning: Tool number exceeds maximum value.

###############################################################################
Error: Compensation offset is out of range.
Error at line: 820
Error in operation: 'Groove1'
Failed while processing onSection() for record 477.
###############################################################################

Error: Failed to invoke function 'onSection'.
Error: Failed to invoke 'onSection' in the post configuration.
Error: Failed to execute configuration.
Stop time: Wednesday, March 11, 2020 2:32:23 PM
Post processing failed.

kind regards

Pieter-Jan De Smet

Re: Error: Compensation offset is out of range.

boopathi.sivakumar — Wed, 11 Mar 2020 15:50:11 GMT

@Anonymous

Make sure you are using the tool compensation offset less than 99

Re: Error: Compensation offset is out of range.

Anonymous — Thu, 12 Mar 2020 15:01:46 GMT

many thx!

topic Error: Compensation offset is out of range. in HSM Post Processor Forum

Error: Compensation offset is out of range.

Re: Error: Compensation offset is out of range.

Re: Error: Compensation offset is out of range.