topic Post Processor Fusion 360 per Mach 3 4th asse in HSM Post Processor Forum

Post Processor Fusion 360 per Mach 3 4th asse

Anonymous — Mon, 20 Apr 2020 20:51:22 GMT

Buonasera a tutti, ho già effettuato numerose ricerche ma senza successo. Sulla mia piccola cnc ho appena installato un 4th asse ma mi sono reso conto che non riesco ad esportare i gcode dal cam di Fusion 360. Penso sia dovuto al fatto che il post processor selezionato non è adatto e per cui vi chiedo se ne avete uno da propormi che sia compatibile con Mach 3 con il 4th asse. Solo per completezza allego uno screen dell'errore che mi da il post processor se inserisco Mach 3 mill.

Re: Post Processor Fusion 360 per Mach 3 4th asse

bob.schultz — Tue, 21 Apr 2020 22:30:12 GMT

You need to enable the 4th axis in the Mach 3 post processor if you have a rotary table mounted to your machine. Be sure to enable it along the correct axis and that the Work Coordinate System of the Setup matches the way the part is mounted on the machine.

Re: Post Processor Fusion 360 per Mach 3 4th asse

Anonymous — Tue, 21 Apr 2020 22:38:07 GMT

Thanks for your reply. My error was caused by a wrong setting of coordinate system. I solved the problem correcting the alignment and now I exported gcode with HAAS A-Axis post processor. Tomorrow I will try to export the corrected model with Mach3Mill post processor (as you say I will enable also the rotary axis by the query in post processing window. Thanks for you reply, have a good day