Sequence numbers on operation vs tool change

Don.Cyr — Mon, 21 Sep 2020 00:10:32 GMT

Nice to only show sequence numbers on tool change, but I am trying to edit my post to have sequence numbers output per operation instead.. easier to search on or Haas control and restart the program from there. Quick example below. When outputting a setup sheet it numbers operations in sequence correctly. I would like the g-code program to be the same. Any ideas?

N1 (ROUGH MILL)

T1 M6
S9000 M3
G54
G0 X-1.353 Y0.9192
G43 Z6.5006 H1
T5
G0 Z6.4506
G1 Z6.3106 F54.

N2(FINISH MILL)

G0 X-1.353 Y0.9192

ETC....

I tried a few things with no luck

Re: Sequence numbers on operation vs tool change

Arun.rs — Mon, 21 Sep 2020 04:34:48 GMT

Hi @Don.Cyr

You can find the solution here

Save file and test the post.

Regards

topic Re: Sequence numbers on operation vs tool change in HSM Post Processor Forum

Sequence numbers on operation vs tool change

Re: Sequence numbers on operation vs tool change