https://forums.autodesk.com/t5/hsm-post-processor-forum/solaruce-fp12000-postprocessor/m-p/9954029#M6123 <P>Hi,</P><P>i would like to get a working postprocessor for a milling machine Solaruce fp12000 with a head/head configuration and a heidenhain control.</P><P>It is a machine with 6 axises. Fusion only can handle 5 so i need to make two postprocessors.</P><P>first setup would be: XYZ-AC where A is around Y and C is around Z.</P><P>Most postprocessors are build to use the 3 rotations (ABC), i need to comment out the B rotation and convert it to A and C...</P><P>So: rotation around de X-asis should lead to C90 A90 on top, and not an output of B90.</P><P>Other rotations need to be handled to. So this is practicly a math problem i guess...</P><P>Any ideas?</P> Mon, 21 Dec 2020 15:25:17 GMT Anonymous 2020-12-21T15:25:17Z https://forums.autodesk.com/t5/hsm-post-processor-forum/solaruce-fp12000-postprocessor/m-p/9954029#M6123 <P>Hi,</P><P>i would like to get a working postprocessor for a milling machine Solaruce fp12000 with a head/head configuration and a heidenhain control.</P><P>It is a machine with 6 axises. Fusion only can handle 5 so i need to make two postprocessors.</P><P>first setup would be: XYZ-AC where A is around Y and C is around Z.</P><P>Most postprocessors are build to use the 3 rotations (ABC), i need to comment out the B rotation and convert it to A and C...</P><P>So: rotation around de X-asis should lead to C90 A90 on top, and not an output of B90.</P><P>Other rotations need to be handled to. So this is practicly a math problem i guess...</P><P>Any ideas?</P> Mon, 21 Dec 2020 15:25:17 GMT https://forums.autodesk.com/t5/hsm-post-processor-forum/solaruce-fp12000-postprocessor/m-p/9954029#M6123 Anonymous 2020-12-21T15:25:17Z