always output H** as H01 in postprocessor

ADASGTT88M — Thu, 12 Sep 2024 18:49:08 GMT

Hi All,

I'm trying to edit the post so that the H value is always H01 every time we post a toolpath to our machine. I have removed the tool call because the machine hasn't got that ability to do a tool

change. I've given it a go myself but can't figure out a way of doing this without the processor failing to post.

we only use T1 on this machine and our tool library is setup for the shop floor on multiple machines so I don't really want to create another tool library full of T1 offsets. Is there a simple way of re-writing hOffset to achieve what I would like the post to do?

Thanks,

Joe

Re: always output H** as H01 in postprocessor

Arun.rs — Fri, 13 Sep 2024 17:31:38 GMT

HI @ADASGTT88M

Change the code from this :

var hOffset = getSetting("outputToolLengthOffset", true) ? hFormat.format(tool.lengthOffset) : "";

To this :

var hOffset = getSetting("outputToolLengthOffset", true) ? "H01" : "";

Regards

topic Re: always output H** as H01 in postprocessor in HSM Post Processor Forum

always output H** as H01 in postprocessor

Re: always output H** as H01 in postprocessor