topic Mori Seiki NV5000 milling post processor in HSM Post Processor Forum

Mori Seiki NV5000 milling post processor

infoGNHCL — Sat, 28 Sep 2024 23:31:49 GMT

Hi Guys,

I have tried many post processor comes with fusion and none of them works for this Mori Seiki NV5000 machine.

Tool change command is coming out as T1 M6 , this needs to be in two separate lines for the machine to read for some reason! And also like to move coolant off and on commands closes to tool reaches and finishes the job. Return to home position at the end of operation for Z and Y axis required "G28 G91 Z0" and G28 G91 Y0", this should be same at the end of program M30 as well. The post i am using now is ' DMG mori CMX with Fanuc Control" and it is working but still need to edit the tool change command to two separate lines. I am guessing this post processor is for Horizontal milling while mine is vertical. some time i have noticed G18 and G19 in the program which is not ideal - to avoid this i am making vertical tangent tool approach motion to none. Any help would be apricated and i am happy to pay if anyone come forward to help.

Have a good day

Regards,

John Martin

Re: Mori Seiki NV5000 milling post processor

AdamKunzo — Sun, 29 Sep 2024 19:26:23 GMT

Hi John,

I offer post processor services and I can sort out these modifications for you.

I'll send you a message.

---

If my response answers your question, please use Accept Solution button.

Re: Mori Seiki NV5000 milling post processor

infoGNHCL — Wed, 02 Oct 2024 13:47:25 GMT

Hi Adam,

thanks for your response, please contact me for further communicatios

Re: Mori Seiki NV5000 milling post processor

CNC_Lee — Sat, 05 Oct 2024 21:17:06 GMT

@infoGNHCL

If the generic posts are not providing the required output, I offer post processor development services and happy to work out a solution for your machine! Please message me if still needing assistance.

Re: Mori Seiki NV5000 milling post processor

tmash1222 — Mon, 24 Nov 2025 20:32:07 GMT

How are you dropping programs to it?