topic Re: heidenhain iso g247 in HSM Post Processor Forum

heidenhain iso g247

Anonymous — Sun, 07 Mar 2021 18:23:00 GMT

How do i post in the begining of the program the g247 in ISO heidenhain?

Re: heidenhain iso g247

andrea.amilo — Mon, 08 Mar 2021 10:35:24 GMT

Hello @Anonymous ,

I think you can add the highlighted lines ( from 398 to 403 ) in onSection function as shown here:

Please test it carefully and let me know.

Re: heidenhain iso g247

Anonymous — Wed, 10 Mar 2021 11:12:40 GMT

Hello. Thank you for the reply.

I have tried, and doesnt work, but i am probably doing something wrong.

This is what appears in the onsection of my post. So should i replace with the one you wrote or simple add another onsection in the post.

Thank you.

Re: heidenhain iso g247

andrea.amilo — Wed, 10 Mar 2021 11:50:13 GMT

Hello @Anonymous ,

you can try to add (copy and paste) the following code lines in your postprocessor, creating a new line after the existing function onSection() declaration, as shown in my picture above :

if (isFirstSection() || getPreviousSection().workOffset != currentSection.workOffset) { writeBlock( "G247 " + localize("DATUM SETTING") + " ~" + EOL + " Q339=" + currentSection.workOffset + " ; " + localize("DATUM NUMBER") ); }

You cannot have two onSection in your postprocessor, so you need to add my code to the existing onSection.

Please test it carefully and let me know.

Re: heidenhain iso g247

Anonymous — Wed, 10 Mar 2021 11:56:10 GMT

That works.

Thank you very much.