https://forums.autodesk.com/t5/hsm-post-processor-forum/post-processor-for-a-horizontal-milling-machine-grob-g552/m-p/10157875#M5625 <P>Hello,</P><P>For an existing horizontal milling machine with Siemens 840D control, I would like to adapt the attached post processor correctly. The problem in the current variant is that the PP does not make the swivel (CYCLE800). Unfortunately, I have no idea what this could be. I hope you can help me. Attached also 2 files 1001_false.mpf(txt) and 1001_correct.mpf(txt). 1001_false.mpf(txt) is output by the PP and 1001_correct.mpf(txt) would be the variant that it should output.</P><P>Thanks a lot for your help!</P><P>&nbsp;</P> Mon, 15 Mar 2021 15:32:11 GMT Anonymous 2021-03-15T15:32:11Z https://forums.autodesk.com/t5/hsm-post-processor-forum/post-processor-for-a-horizontal-milling-machine-grob-g552/m-p/10157875#M5625 <P>Hello,</P><P>For an existing horizontal milling machine with Siemens 840D control, I would like to adapt the attached post processor correctly. The problem in the current variant is that the PP does not make the swivel (CYCLE800). Unfortunately, I have no idea what this could be. I hope you can help me. Attached also 2 files 1001_false.mpf(txt) and 1001_correct.mpf(txt). 1001_false.mpf(txt) is output by the PP and 1001_correct.mpf(txt) would be the variant that it should output.</P><P>Thanks a lot for your help!</P><P>&nbsp;</P> Mon, 15 Mar 2021 15:32:11 GMT https://forums.autodesk.com/t5/hsm-post-processor-forum/post-processor-for-a-horizontal-milling-machine-grob-g552/m-p/10157875#M5625 Anonymous 2021-03-15T15:32:11Z https://forums.autodesk.com/t5/hsm-post-processor-forum/post-processor-for-a-horizontal-milling-machine-grob-g552/m-p/10157924#M5626 <P>for a better understanding, here is a kinematic model of the machine</P> Mon, 15 Mar 2021 15:47:18 GMT https://forums.autodesk.com/t5/hsm-post-processor-forum/post-processor-for-a-horizontal-milling-machine-grob-g552/m-p/10157924#M5626 Anonymous 2021-03-15T15:47:18Z