topic Re: Excel setup sheet post in HSM Post Processor Forum

Excel setup sheet post

dames123 — Thu, 14 Nov 2024 22:20:47 GMT

Hello all,

Is there a way to get $program.workOffset to output G54, G55, G56 etc. instead of 1,2,3 in the excel setup sheet post?

Thanks.

andrea.amilo — Fri, 15 Nov 2024 15:57:10 GMT

you could try to modify the original 'Setup Sheet Excel' postprocessor as shown below:

adding + 53 at the end of line 539.

Please test it carefully and let me know. Thanks.

dames123 — Fri, 15 Nov 2024 20:29:53 GMT

I tried that and it doesn't seem to work. I'm not sure what $program.workOffset is referencing in the template.

Thanks.

andrea.amilo — Mon, 18 Nov 2024 06:54:47 GMT

could you please attach here the postprocessor you are using and a picture of the resulting spreadsheet, showing me the modification you need ?

Thanks

dames123 — Mon, 18 Nov 2024 15:35:51 GMT

I would like to see 54,55,56 instead of 1,2,3 on the fixture offset. This is just something the operators are not used to seeing.

Thanks.

andrea.amilo — Tue, 19 Nov 2024 08:17:03 GMT

please try to modify the line 192 as highlighted above:

Test it carefully and let me know.

Thanks.

dames123 — Tue, 19 Nov 2024 14:32:19 GMT

Brilliant! Thanks @andrea.amilo