Use always TCP

marcoCAGYK — Thu, 17 Apr 2025 08:52:59 GMT

Hi All,

I have a head/head machine that fails with G43, and I would like to use TCP mode G43.4 even when the tool axis is aligned to the Z axis.
As you can see in the example code below, the first machining uses G43 while the second, where there is a rotation, uses G43.4
I would like to make the first machining also use G43.4

Thank you for your help

% O1001 (MACCHINA) ( FORNITORE AUTODESK) ( MODEL GENERIC 5-AXIS CB HEAD-HEAD) ( DESCRIPTION THIS MACHINE HAS YXZCB AXIS ON THE HEAD) (T2 D=16. CR=0.8 - BULLNOSE END MILL) (T14 D=6. CR=0. TAPER=120DEG - FORATURA) N10 G90 G94 G17 G49 G40 G80 N15 G21 N20 G53 G00 Z-100. N25 G00 B0. C0. (FORATURA3) N30 T14 M06 (PUNTA D6) N35 T2 N40 S1400 M03 N45 G17 G90 G94 N50 G54 N55 G00 B0. C0. N60 G00 G43 X50. Y-50. Z40. H14 N65 G00 Z30. N70 G98 G81 X50. Y-50. Z-10. R5. F120. N75 G80 N80 Z40. N85 G53 G00 Z-100. (FORATURA3 5) N90 G00 B90. C-90. N95 G49 N100 G00 G43.4 X50. Y-115. Z-50. H14 N105 G00 Y-105. N110 G01 Y-90. F120. N115 G00 Y-105. N120 Y-115. N125 G53 G00 Z-100. N130 G49

Re: Use always TCP

khleeYY9B5 — Fri, 25 Jul 2025 12:09:00 GMT

g43이 어디있나요?

topic Use always TCP in HSM Post Processor Forum

Use always TCP

Re: Use always TCP