https://forums.autodesk.com/t5/hsm-post-processor-forum/auger-on-fourth-axis-a/m-p/11412999#M3141 <P>Hello.<BR />I need to perform a non-trivial task with the help of HSM! In my CNC system, instead of a spindle with a milling cutter, there is a dispenser with chocolate mass... The main coordinate axis is standard XYZ and the fourth A. When the A axis rotates, the auger rotates and squeezes the chocolate mass... I need the dispenser to come to a specified point and squeeze out a measured dose of chocolate by rotating the A axis. I use the standard strategy "Contour" or "Engraving" or "Drilling" and each time I manually write the codes for the A axis... Is there any way to do this automatically?</P><P>&nbsp;</P> Sat, 10 Sep 2022 12:53:00 GMT dxmv 2022-09-10T12:53:00Z https://forums.autodesk.com/t5/hsm-post-processor-forum/auger-on-fourth-axis-a/m-p/11412999#M3141 <P>Hello.<BR />I need to perform a non-trivial task with the help of HSM! In my CNC system, instead of a spindle with a milling cutter, there is a dispenser with chocolate mass... The main coordinate axis is standard XYZ and the fourth A. When the A axis rotates, the auger rotates and squeezes the chocolate mass... I need the dispenser to come to a specified point and squeeze out a measured dose of chocolate by rotating the A axis. I use the standard strategy "Contour" or "Engraving" or "Drilling" and each time I manually write the codes for the A axis... Is there any way to do this automatically?</P><P>&nbsp;</P> Sat, 10 Sep 2022 12:53:00 GMT https://forums.autodesk.com/t5/hsm-post-processor-forum/auger-on-fourth-axis-a/m-p/11412999#M3141 dxmv 2022-09-10T12:53:00Z