https://forums.autodesk.com/t5/hsm-post-processor-forum/haas-post-mod-position-table-center-of-machine/m-p/6103569#M28185 At the end of each program the Generic Haas Post positions the table on the far left side of the machine (Machine home X0, Y0, Z0).&nbsp; Instead of jogging the machine each time to retrieve your part (in the negative X direction) it was kinda fun to modify the Post and automatically position the table in the center at the end of each program.&nbsp; <BR /><BR />Here's how to do it:<BR /><BR />1. Click Post Process<BR />2. From the Post Configuration drop down select "HAAS - MILLING.cps - HAAS factory"<BR />3. Click Open config<BR />4. Scroll down to line 1633<BR />5. Change the "X" value from 0. to -18. (see red arrow in attached picture)<BR /><BR />This inserts G53 X-18. Y0. at the end of each program!&nbsp; Sweetness. Attached is the modified post processor, but way it's cooler if you do it yourself and learn JavaScript. Sun, 22 Mar 2015 00:56:50 GMT daniel.vidakovich 2015-03-22T00:56:50Z