https://forums.autodesk.com/t5/hsm-post-processor-forum/editing-customizing-post-processor/m-p/9012885#M27349 <P>This is an old thread with a lot of history but I hope I can revive it to help solve my issue. I have a CNC Masters Baron and am in the same boat as many here in that I cannot find a PP for this mill that works with F360. I'm just a hobbyist who's learning so dropping the substantial investment for Visual Mill isn't in the cards but it is the only SW I've found that offers a CNCMasters PP right out of the box.&nbsp;</P><P>&nbsp;</P><P>The PP linked above works for the most part but my machine loses its X/Y after every G02/03. When I manually code G02/03 I don't appear to have the same issue. When I manually remove the circular cuts from the code I don't get the same issue.</P><P>&nbsp;</P><P>Any help would be greatly appreciated.</P> Sun, 08 Sep 2019 18:38:11 GMT pfrancescutti 2019-09-08T18:38:11Z