https://forums.autodesk.com/t5/hsm-post-processor-forum/centroid-post-is-adding-extra-t-command/m-p/11741715#M2593 <P>Hey there, if T5 would be the next tool to use, i'd think "Preload Tool" is active in you POST Options. The T5 after the M6 (which actually commands a tool change of the tool in the spindle) should not affect the tool offsets.</P><P>&nbsp;</P><P>If T5 isn't in use at all, there's more serious problem in your post.</P> Thu, 09 Feb 2023 06:42:11 GMT Sq_14 2023-02-09T06:42:11Z https://forums.autodesk.com/t5/hsm-post-processor-forum/centroid-post-is-adding-extra-t-command/m-p/11740952#M2592 <P>Hello,</P><P>&nbsp;</P><P>Attached is the G code posted from Fusion 360 for our Centroid CNC router with a tool changer. The post processor is adding a T command for a different tool after it instructs a tool change. This is odd, and I can't find a setting in Fusion 360 that would cause this to happen. Obviously this affects tool height compensation and Z height accuracy. Please help!</P><P>&nbsp;</P><P>Copy and pasted code/issue from line 132 - 135 in attached G code file:<BR /><BR /></P><LI-CODE lang="general">(2D Pocket2 (2)) N645 M1 N650 T1 M6 N655 T5</LI-CODE><P>&nbsp;</P> Wed, 08 Feb 2023 22:04:53 GMT https://forums.autodesk.com/t5/hsm-post-processor-forum/centroid-post-is-adding-extra-t-command/m-p/11740952#M2592 pocolypz 2023-02-08T22:04:53Z https://forums.autodesk.com/t5/hsm-post-processor-forum/centroid-post-is-adding-extra-t-command/m-p/11741715#M2593 <P>Hey there, if T5 would be the next tool to use, i'd think "Preload Tool" is active in you POST Options. The T5 after the M6 (which actually commands a tool change of the tool in the spindle) should not affect the tool offsets.</P><P>&nbsp;</P><P>If T5 isn't in use at all, there's more serious problem in your post.</P> Thu, 09 Feb 2023 06:42:11 GMT https://forums.autodesk.com/t5/hsm-post-processor-forum/centroid-post-is-adding-extra-t-command/m-p/11741715#M2593 Sq_14 2023-02-09T06:42:11Z