topic Re: Fagor 8055 Turning Post Processor Needed in HSM Post Processor Forum

Fagor 8055 Turning Post Processor Needed

Anonymous — Mon, 04 Jan 2016 23:02:19 GMT

Hello,
I need a turning post processor for a Fagor 8055.

Thanks

Re: Fagor 8055 Turning Post Processor Needed

scottmoyse — Tue, 05 Jan 2016 00:51:37 GMT

There isn't one available in the product. I know one reseller that has done it for a paying customer. Please contact your local VAR and ask them about it.

I'm assuming you are using HSMWorks (trial?) and not HSMXpress like you have listed next to your name?

Re: Fagor 8055 Turning Post Processor Needed

Anonymous — Tue, 05 Jan 2016 12:34:19 GMT

I'm using Fusion 360, and HSMWorks Express with Solidworks.

Re: Fagor 8055 Turning Post Processor Needed

skidsolo — Tue, 05 Jan 2016 13:51:01 GMT

We have a customer who is using this, not the same controller but it might be a good start.

Re: Fagor 8055 Turning Post Processor Needed

Anonymous — Fri, 08 Jan 2016 13:20:19 GMT

That Fagor 8025 post is a generic FANUC Turning post, it doesn't work, but it is a starting point.

Re: Fagor 8055 Turning Post Processor Needed

Anonymous — Tue, 12 Jan 2016 00:48:10 GMT

I have tried this cps file mentioned and I am able to get some of it to work if you run it through the WINDNC free Fagor converter (this allows the 8055iTC to read it). Still having trouble with alot of it, can someone at Autodesk contact me as I would be happy to pay for a fully tweaked post for my machine.

Thank you,
Chad

Re: Fagor 8055 Turning Post Processor Needed

scottmoyse — Tue, 12 Jan 2016 01:05:58 GMT

SkunkWorks wrote:

can someone at Autodesk contact me as I would be happy to pay for a fully tweaked post for my machine.

SkunkWorks wrote:
can someone at Autodesk contact me as I would be happy to pay for a fully tweaked post for my machine.

Autodesk don't charge out their post team, but if you contact your local reseller they will be able to get it sorted for you.

Re: Fagor 8055 Turning Post Processor Needed

tacticalkeychains — Mon, 08 Feb 2016 16:05:59 GMT

I am that 8025 customer, and my post is tweaked from the one they gave you I believe. It is attached. I don't believe the Canned Threading cycle works, I can't really remember. I also part off in the negative direction.

Re: Fagor 8055 Turning Post Processor Needed

tacticalkeychains — Sat, 07 May 2016 20:31:07 GMT

I now have a Fagor 8055 and am wondering if you got it figured out?

Re: Fagor 8055 Turning Post Processor Needed

tacticalkeychains — Sun, 14 Aug 2016 14:20:34 GMT

I'm still in need of this post, as well as a few other people. We are all willing to pitch in $$$ for your time. We have a working post for turning, but we can't do threading or C axis work.

Re: Fagor 8055 Turning Post Processor Needed

chad.blundell — Wed, 19 Oct 2016 23:37:25 GMT

Just contacted my VAR today as I wanted them to create this post for my 8055iTC (Sharp1118HCNC). Unless anyone has any further developments on this topic?

Thanks,

Chad

Re: Fagor 8055 Turning Post Processor Needed

tacticalkeychains — Wed, 19 Oct 2016 23:44:03 GMT

They just contacted me. Email tacticalkeychains at g mail

Re: Fagor 8055 Turning Post Processor Needed

Anonymous — Thu, 30 Apr 2020 02:55:49 GMT

I know this is an old topic, but I am just curious if a working post processor for the Fagor 8055 TC has ever been achieved?

I have a Dalian CKE6136i lathe at work and I would like to try to use Fusion 360 to generate the toolpaths for it.

Carl

Re: Fagor 8055 Turning Post Processor Needed

scottmoyse — Tue, 23 Jun 2020 07:05:41 GMT

@Anonymous wrote:

I know this is an old topic, but I am just curious if a working post processor for the Fagor 8055 TC has ever been achieved?

I have a Dalian CKE6136i lathe at work and I would like to try to use Fusion 360 to generate the toolpaths for it.

Carl

@Anonymous this one works and is supported. https://massif.dev/post-processors/Fagor-Turning

Re: Fagor 8055 Turning Post Processor Needed

sukhkenya001 — Thu, 01 Jun 2023 13:36:08 GMT

I need post processor to fagor control

Re: Fagor 8055 Turning Post Processor Needed

scottmoyse — Tue, 09 May 2023 22:43:49 GMT

There is a proven Fagor turning post here: https://massif.dev/post-processors/fagor-turning

Re: Fagor 8055 Turning Post Processor Needed

CNC_Lee — Fri, 12 May 2023 23:09:38 GMT

@sukhkenya001 I offer post processor development as a service and can definitely help with this! Email me at: lee@cnclee.com if still needing assistance.