topic Re: Sharing Modified post processors in HSM Post Processor Forum

Sharing Modified post processors

kblackwell — Fri, 29 Jul 2016 15:35:46 GMT

I was wondering if there is a section of this forum where the community can share back posts they have modified and improved? I have a generic post that has been heavily modified and i would like to share it back to the community. I see that there is a post processors library but it would be nice if there was a section for crowd sourced versions.

Re: Sharing Modified post processors

bob.schultz — Fri, 29 Jul 2016 16:03:34 GMT

It is great that you want to share the work that you have done with other users! There is no repository for customer generated posts, but you can easily share it back with the community simply by placing it on this forum. Be sure to give a good description of the machine and control that the post was developed for in the Subject line and a more detailed description including any special features in the comments. The search feature is a commonly used tool in the forum and is used to find subject matter pertaining to the user's needs, so your post will come up when a user searches for this machine.

Not all content on the forum has to be requests, if you develop a post you would like to share with everyone or develop a technique that could be useful for other users, then feel free to post that information to this forum.

Re: Sharing Modified post processors

kblackwell — Fri, 29 Jul 2016 17:52:37 GMT

Bob, thank your for the quick reply. I will do as you suggest in the meantime. One of the best features that drew me to HSMWorks was the fact that posts were free, as long as one was available, which in the case of our Haas UMC 750 was the case. But, it was a generic post with only basic functionality, although it works great as is. I believe this community would benefit greatly from a crowd sourced section of the post library that would allow users to upload post processors for everyone to share, vet, and rate them. When a post's rating is high enough HSMWorks could integrate the new features into the generic posts thereby greatly increasing the generic posts usability, and making the changes official. There is no other CAM software company that i can think of that does something like this, but there again they all charge for their posts so they have a different business model for post processors. I think this would take a huge weight off of HSMWorks's post department as well.

Re: Sharing Modified post processors

bob.schultz — Fri, 29 Jul 2016 21:00:40 GMT

Thanks for the feedback. I will pass it along and we'll see what happens.

Re: Sharing Modified post processors

al.whatmough — Sat, 30 Jul 2016 01:28:53 GMT

You asked. We delivered.

We did a soft roll-out of an Ideastation today.

There is a category for posts.

Simple create a new idea. Attached the post (or what you want the post do to) and start the voting 🙂

http://forums.autodesk.com/t5/hsm-ideas/idb-p/231

Thank you for being a contributing member of the community.

Re: Sharing Modified post processors

LibertyMachine — Sat, 30 Jul 2016 00:37:12 GMT

@al.whatmough

Clicking your link:

"You do not have sufficient privileges for this resource or its parent to perform this action.

Click your browser's Back button to continue."

Re: Sharing Modified post processors

al.whatmough — Sat, 30 Jul 2016 01:29:18 GMT

@LibertyMachine thanks, fixed the link:

http://forums.autodesk.com/t5/hsm-ideas/idb-p/231

Re: Sharing Modified post processors

kblackwell — Mon, 01 Aug 2016 11:48:15 GMT

I get the same error when i click "Submit a new Idea"

You do not have sufficient privileges for this resource or its parent to perform this action.

Click your browser's Back button to continue.

Re: Sharing Modified post processors

al.whatmough — Mon, 01 Aug 2016 15:10:51 GMT

CAn you try again - it should be working now. Thank you for your feedback!

Re: Sharing Modified post processors

kblackwell — Mon, 01 Aug 2016 20:06:15 GMT

Submitting a new idea works but i'm not sure how to categorize as a "Post". I clicked the link to submit idea but i can't see where you categorize as a "Post", maybe i'm doing something wrong.

Re: Sharing Modified post processors

al.whatmough — Mon, 01 Aug 2016 20:12:14 GMT

I don't see your idea, are you posting here:

http://forums.autodesk.com/t5/hsm-ideas/idb-p/231

You should be able to set the category to Posts:

Re: Sharing Modified post processors

kblackwell — Mon, 01 Aug 2016 20:56:39 GMT

I haven't posted the idea yet because i couldn't find how to set the category. Here is what i see when i click the "Submit Idea" button the HSM section

http://forums.autodesk.com/t5/hsm-ideas/idb-p/231

Re: Sharing Modified post processors

al.whatmough — Mon, 01 Aug 2016 21:03:00 GMT

Thanks for Catching this. I confirmed this is an issues for others outside of Autodesk.

Re: Sharing Modified post processors

al.whatmough — Mon, 01 Aug 2016 21:05:05 GMT

the team tells me it is fixed.

Re: Sharing Modified post processors

kblackwell — Mon, 01 Aug 2016 21:10:47 GMT

Yes, i have confirmed i have the category selection now. I'll submit the idea in the morning. Thanks you Al.

Re: Sharing Modified post processors

LibertyMachine — Sun, 07 Aug 2016 14:58:04 GMT

@al.whatmough

I don't suspect that you are the person that this question should be posed to. However, I don't know who that individual is, so you get to hear it and hopefully pass it along 🙂

Any chance the Fusion CAM community could get a sticky on it's forum directing to the HSM IdeaStation? It would be a great resource for those that don't spend much time outside of the Fusion forums and might still be looking at the Fusion IdeaStation as the only recourse to seeing CAM improvements