topic Setup sheet post - Model image not shown in HSM Post Processor Forum

Setup sheet post - Model image not shown

Timon- — Wed, 14 Dec 2016 21:00:33 GMT

Hi,

I would like to use the Setup-Sheet in Fusion360 post to generate a HTML file with job information.

It is easy to add and remove information to get it more custom made, but I'm unable to get the model image.

Even when I'm using the latest setup-sheet post from Autodesk, I don't get the model image.

Only when I RMC on a setup, and generate a setup sheet, the image is shown. But this setupsheet is not adjustable as far as I know.

I've tried many different ways right now, but still no solution.

In the post it is asking for

if (show && currentSection.hasParameter("autodeskcam:preview-name")) ...

, but in the dump file there is no parameter 'preview-name' (see attached pictures).

Does anyone has a solution to get this working?

I've also attached the posts that I have used for testing. Would be great if someone can test it to make sure it is not a PC or installation issue.

Re: Setup sheet post - Model image not shown

ivan.stanojevic — Thu, 15 Dec 2016 08:52:25 GMT

Hi,

I have the same issue when I try to post-process with setup-sheet.cps.

But if I right click on setup and click on setup sheet I get the image.

Did you try doing this way?

Re: Setup sheet post - Model image not shown

Timon- — Tue, 20 Dec 2016 11:10:45 GMT

Hi Ivan,

Thanks for your reply. Yes when I do it on this way, it works.

But this is not the 'modified template', and I can't find the file which is used for creating this setup sheet (so I can modify that one).

Re: Setup sheet post - Model image not shown

fonsecr — Tue, 04 Apr 2017 16:47:00 GMT

Please try the latest Setup Sheets from the post library https://cam.autodesk.com/posts/?p=setup-sheet to see if it fixes the issue. Fix will also be included in one of the following releases (around May for Fusion).