topic Re: FORCE TOOL CHANGE ON PASS THROUGH in HSM Post Processor Forum https://forums.autodesk.com/t5/hsm-post-processor-forum/force-tool-change-on-pass-through/m-p/6824154#M20071 <P>There is a specific Manual NC option called "force tool change", so I recommend to use this command instead.</P> Mon, 23 Jan 2017 13:53:19 GMT AchimN 2017-01-23T13:53:19Z FORCE TOOL CHANGE ON PASS THROUGH https://forums.autodesk.com/t5/hsm-post-processor-forum/force-tool-change-on-pass-through/m-p/6823134#M20070 <P>I would like my post to do a force tool change every time i use a manual NC - pass through. Can someone please help? thank you</P> Mon, 23 Jan 2017 00:43:29 GMT https://forums.autodesk.com/t5/hsm-post-processor-forum/force-tool-change-on-pass-through/m-p/6823134#M20070 sevenfive85 2017-01-23T00:43:29Z Re: FORCE TOOL CHANGE ON PASS THROUGH https://forums.autodesk.com/t5/hsm-post-processor-forum/force-tool-change-on-pass-through/m-p/6824154#M20071 <P>There is a specific Manual NC option called "force tool change", so I recommend to use this command instead.</P> Mon, 23 Jan 2017 13:53:19 GMT https://forums.autodesk.com/t5/hsm-post-processor-forum/force-tool-change-on-pass-through/m-p/6824154#M20071 AchimN 2017-01-23T13:53:19Z