topic Re: Problem with Cycle81 in HSM Post Processor Forum

Problem with Cycle81

janus2 — Tue, 14 Feb 2017 11:36:53 GMT

Hello!

I use a variant of the generic Siemens turning PP for my EMCO Concept Turn 55.

Everything works fine so far.

But when I use Drill in Fusion 360 CAM it results in a Cycle81.

Cycle81 is not running on my EMCO. Not even the Cycle81 Siemens Examples is working on my EMCO!?

Is there a way to disable Cycle81 and write standard G-Code instead?

Thanks for any help

Jan

Re: Problem with Cycle81

ivan.stanojevic — Tue, 14 Feb 2017 13:00:53 GMT

Hi,

Yes, there is a way.

You might want to exclude some lines of code related to the Cycle81.

Those are located in OnCycle function in your post:

 case "drilling":
    writeBlock(
      "CYCLE81(" + zFormat.format(RTP) +
      ", " + zFormat.format(RFP) +
      ", " + zFormat.format(SDIS) +
      ", " + zFormat.format(DP) +
      ", " /*+ zFormat.format(DPR)*/ + ")"
    );
    break;

When you block/delete those it should output the clean G0/G1 code.

Re: Problem with Cycle81

janus2 — Tue, 14 Feb 2017 15:19:57 GMT

Hello!

Thanks for the fast answer.

This did the job. Now it is clean code and should work.

Thanks again

Jan

Re: Problem with Cycle81

ivan.stanojevic — Tue, 14 Feb 2017 15:25:09 GMT

@janus2

You welcome, you can do the same for other drilling cycles too.