topic Re: Check all Tools on Renishaw Tool setter (tool break detection) in HSM Post Processor Forum

Check all Tools on Renishaw Tool setter (tool break detection)

sales — Wed, 15 Feb 2017 17:01:52 GMT

Good morning,

Check all Tools on Renishaw Tool setter OTS (tool break detection) VF4 Haas 2012

We are using the Haas VF Mill post.

I like to modify the post so it will check all tools to see if there broken.

With the current post, I have to change and edit all 41 tools to enable (Break control) with a check mark, it would take to much time.

I tried to use compare and edit but it can not be done enabling (Break control) for all tools.

Can we add a simple switch for it or modify the if statement?

Thank you.

Mike

Laurens-3DTechDraw — Sun, 19 Feb 2017 08:49:39 GMT

Try the attached post.

sales — Sun, 19 Feb 2017 19:57:06 GMT

Hi Laurens,

Works great, thank you!

Where can I look up the revision changes on the post?

Yours is a $Revision: 41329 mine was 41125.

Mike

Laurens-3DTechDraw — Sun, 19 Feb 2017 20:01:57 GMT

You can find the posts here and there it's the latest version with the list of recent changes:
http://cam.autodesk.com/posts/?p=haas

s.noke71 — Fri, 28 Jun 2019 12:44:03 GMT

Cant this be done on the siemens 840d for a Doosan VMC?