808D Siemens Post Processor giving me an error

b00075868 — Tue, 08 Aug 2023 14:00:28 GMT

Hi,

I am trying to use the 808D siemens post processor (Provided by the fusion360 library) to see if the G code generated will work on my machine but I am receiving an error whenever I try to post it,

I tried to use the Siemens turning post processor (Also provided by the fusion360 library) and it works just fine but my machine is unable to read that g code as it is programmed to read 808D post processors, is there any way to fix this issue or is there something I need to do before hand to make sure it works?

The error obtained is shown below:

Information: Configuration: Siemens SINUMERIK 808D
Information: Vendor: Siemens
Information: Posting intermediate data to 'C:\Users\Design\Documents\Fusion 360\NC Programs\1001.mpf'
Error: Failed to post process. See below for details.
...
Code page changed to '1252 (ANSI - Latin I)'
Start time: Saturday, July 29, 2023 2:46:18 PM
Code page changed to '20127 (US-ASCII)'
Post processor engine: 4.5971.0
Configuration path: C:/Users/Design/AppData/Roaming/Autodesk/Fusion 360 CAM/Posts/siemens-808d.cps
Security level: 1000
Include paths: C:/Users/Design/AppData/Roaming/Autodesk/Fusion 360 CAM/Posts
Configuration modification date: Thursday, July 27, 2023 12:41:22 PM
Output path: C:\Users\Design\Documents\Fusion 360\NC Programs\1001.mpf
Checksum of intermediate NC data: ab6c39489b9db8fe84c2650c37eefd49
Checksum of configuration: 6507de86ed2d155a160d0160f1664083
Vendor url: http://www.siemens.com
Legal: Copyright (C) 2012-2023 by Autodesk, Inc.
Generated by: Fusion 360 CAM 2.0.16753
...

###############################################################################
Error: Turning toolpath is not supported by the post configuration.
Failed while processing onOpen().
###############################################################################

Error:
Error: Failed to invoke 'onOpen' in the post configuration.
Error: Failed to execute configuration.
Stop time: Saturday, August 8, 2023 2:46:18 PM
Post processing failed.

Re: 808D Siemens Post Processor giving me an error

CNC_Lee — Thu, 10 Aug 2023 13:54:15 GMT

@b00075868

You will need to get a custom post processor written if the generic posts are not providing the required output for your machine. I offer post processor development services and happy to work out a solution for your machine! PM me if still needing assistance.

topic 808D Siemens Post Processor giving me an error in HSM Post Processor Forum

808D Siemens Post Processor giving me an error

Re: 808D Siemens Post Processor giving me an error