topic Re: Heidenhain 426 M command post edits in HSM Post Processor Forum

Heidenhain 426 M command post edits

Anonymous — Sun, 26 Mar 2017 10:47:42 GMT

Hi All,

I have made some changes to the post now and have some M1, M5, M9, M3 commands that I need to re order. Where would I look in the post for the M3 command at the start of the program and the other M commands.

Any help very welcome

Kind Regards James JA Precision

Re: Heidenhain 426 M command post edits

George-Roberts — Mon, 27 Mar 2017 13:02:06 GMT

Can you post out a file and mark up the changes (where the code needs to be moved to) and upload this along with a copy of your post processor?

Re: Heidenhain 426 M command post edits

Anonymous — Mon, 27 Mar 2017 18:27:14 GMT

Hi George,

Thank you for your reply, I have attached a copy of the post and a copy of the program that's been posted this drills 10 holes on a PCD something simple to start with to get the post running the basics.

I have marked in red the changes required to the post.

I have attached a copy of the post also

Thank you for your assistance with the edits any info you can add into the post so I can see where the edits are would be great also.

Kind Regards James JA Precision

Re: Heidenhain 426 M command post edits

patrik_stellgren — Mon, 27 Mar 2017 22:15:55 GMT

why are you now using a TNC 155 post when you had a 426 a couple of weeks ago?

Re: Heidenhain 426 M command post edits

Anonymous — Tue, 28 Mar 2017 15:26:03 GMT

Hi Patrik,

Well the original post that I have been using was based on a 155 control
and has be very reliable so far for the 426. I did try with the other
processor and it seams to be posting the program very differently to
what I was using. So I thought that this would need less work to bring
it together.

Regards James JA Precision

Re: Heidenhain 426 M command post edits

Anonymous — Tue, 28 Mar 2017 15:26:04 GMT