topic Help with editing post for Amada Laser in HSM Post Processor Forum https://forums.autodesk.com/t5/hsm-post-processor-forum/help-with-editing-post-for-amada-laser/m-p/6997434#M19148 <P>If someone could spare the time and help me edit this post for our Amada Laser, I would greatly appreciate it. It's been frustrating to say the least and i dont have the time right now to modify it myself. I've attached three documents; the post, the current NC program it spits out and the correct NC program that I would like it to spit out. I've also made notes in the correct program for anyone who wants to help but is not familiar with an Amada Laser.</P><P>&nbsp;</P><P>I tried to attach a screencast of the part being processed but was having trouble with inserting (Im still a newb to the forum lol)</P><P>The part is a simple 4 x 2 rectangle with two half inch holes.</P><P>Let me know if you guys have any questions or comments. I'll try to answer the best i can. Thank you for your time</P> Wed, 05 Apr 2017 14:24:12 GMT Jwoody44 2017-04-05T14:24:12Z Help with editing post for Amada Laser https://forums.autodesk.com/t5/hsm-post-processor-forum/help-with-editing-post-for-amada-laser/m-p/6997434#M19148 <P>If someone could spare the time and help me edit this post for our Amada Laser, I would greatly appreciate it. It's been frustrating to say the least and i dont have the time right now to modify it myself. I've attached three documents; the post, the current NC program it spits out and the correct NC program that I would like it to spit out. I've also made notes in the correct program for anyone who wants to help but is not familiar with an Amada Laser.</P><P>&nbsp;</P><P>I tried to attach a screencast of the part being processed but was having trouble with inserting (Im still a newb to the forum lol)</P><P>The part is a simple 4 x 2 rectangle with two half inch holes.</P><P>Let me know if you guys have any questions or comments. I'll try to answer the best i can. Thank you for your time</P> Wed, 05 Apr 2017 14:24:12 GMT https://forums.autodesk.com/t5/hsm-post-processor-forum/help-with-editing-post-for-amada-laser/m-p/6997434#M19148 Jwoody44 2017-04-05T14:24:12Z