corection postprocessor for sinumerik 802s/c

Mark73_12 — Tue, 26 Sep 2017 11:40:30 GMT

With the help of the forum members I edited the SINUMERIK 804D POSTPROSESSOR for the machine with an 802S / C controller. (Thanks!)

As a result, the use of CYCLE has been adjusted according to the connection of the 802S / C controller. During the execution of the program, the machine performs twice the drilling of the first drill (which is supposed to be done only once).

What changes should be made to POSTORISESSOR to prevent the machine from performing this dual operation?

N23 S5000 M3

N24 G54

N25 G0 X3.2 Y-3.6249

N26 G0 Z0.2

N27 M8

N28 G17

N29 F13.33

N30 R101=0 R102=0.2 R103=-0.2 R104=-1.7 R110=-0.55 R111=0 R105=0.25 R109=0.25 R108=13.3333 R127=0 R107=13.3333

N31 LCYC83

N32 X3.2 Y-3.6249

N33 LCYC83

N34 X4

N35 LCYC83

N36 X4.8

N37 LCYC83

N38 G0 Z0.2

N17 M9

N18 T5 D5

N19 M6

N20 S5000 M3

N21 G54

N22 G0 X3.2 Y-3.6249

N23 G0 Z0.2

N24 M8

N25 G17

N26 F13.33

N27 MCALL CYCLE83(0, -0.2, 0.2, -1.7, , -0.55, , 0, , , 1, 0, , 0.35, 0, 0.25, 0)

N28 X3.2 Y-3.6249

N29 X4

N30 X4.8

N31 MCALL

N32 G0 Z0.2

N34 G0 SUPA Z0 D0

N35 M30

Re: corection postprocessor for sinumerik 802s/c

Jorge_Ferreira — Thu, 30 May 2019 19:50:16 GMT

Hello, meabie a long tiem ago of this, I hope still useful for you an others, I just edit the 802s post to LCYC formats

topic corection postprocessor for sinumerik 802s/c in HSM Post Processor Forum

corection postprocessor for sinumerik 802s/c

Re: corection postprocessor for sinumerik 802s/c