https://forums.autodesk.com/t5/hsm-post-processor-forum/fadal-post/m-p/7678759#M16076 <P>Does anyone have an updated post for the Fadal that puts an xy move with the fixture offset E? They should not be just E1. it should be E1 x-10.y1. if this is the move to first position. I can provide some examples if needed</P><P>&nbsp;</P> Wed, 10 Jan 2018 13:50:30 GMT Anonymous 2018-01-10T13:50:30Z https://forums.autodesk.com/t5/hsm-post-processor-forum/fadal-post/m-p/7678759#M16076 <P>Does anyone have an updated post for the Fadal that puts an xy move with the fixture offset E? They should not be just E1. it should be E1 x-10.y1. if this is the move to first position. I can provide some examples if needed</P><P>&nbsp;</P> Wed, 10 Jan 2018 13:50:30 GMT https://forums.autodesk.com/t5/hsm-post-processor-forum/fadal-post/m-p/7678759#M16076 Anonymous 2018-01-10T13:50:30Z https://forums.autodesk.com/t5/hsm-post-processor-forum/fadal-post/m-p/7687261#M16077 <P>I am guessing that you are using Format 1, as it should not matter where the fixture offset code is for Format 2.</P> <P>&nbsp;</P> <P>We have made the requested change in the Fadal post and it will be available online shortly.&nbsp; Here is a copy of the post for you to use until the post&nbsp;becomes available in the online Post Library.</P> Fri, 12 Jan 2018 23:54:15 GMT https://forums.autodesk.com/t5/hsm-post-processor-forum/fadal-post/m-p/7687261#M16077 bob.schultz 2018-01-12T23:54:15Z