https://forums.autodesk.com/t5/hsm-post-processor-forum/add-angle-starting-synchronized-tapping-okuma/m-p/12368108#M1606 <P>Hi,</P><P>&nbsp;</P><P>Try attached PP.</P><P>&nbsp;</P><P><SPAN>If my post answers your question, please use Accept as Solution.</SPAN></P> Fri, 10 Nov 2023 09:48:26 GMT AdamKunzo 2023-11-10T09:48:26Z https://forums.autodesk.com/t5/hsm-post-processor-forum/add-angle-starting-synchronized-tapping-okuma/m-p/12367984#M1605 <P>good morning, I should add the starting angle on the tapping of my post processor okuma.<BR />Basically on cycle G284 it needs to add "E0", so the machine brings in spindle in position with angle 0.<BR />Thank you</P> Fri, 10 Nov 2023 08:44:34 GMT https://forums.autodesk.com/t5/hsm-post-processor-forum/add-angle-starting-synchronized-tapping-okuma/m-p/12367984#M1605 info 2023-11-10T08:44:34Z https://forums.autodesk.com/t5/hsm-post-processor-forum/add-angle-starting-synchronized-tapping-okuma/m-p/12368108#M1606 <P>Hi,</P><P>&nbsp;</P><P>Try attached PP.</P><P>&nbsp;</P><P><SPAN>If my post answers your question, please use Accept as Solution.</SPAN></P> Fri, 10 Nov 2023 09:48:26 GMT https://forums.autodesk.com/t5/hsm-post-processor-forum/add-angle-starting-synchronized-tapping-okuma/m-p/12368108#M1606 AdamKunzo 2023-11-10T09:48:26Z https://forums.autodesk.com/t5/hsm-post-processor-forum/add-angle-starting-synchronized-tapping-okuma/m-p/12368193#M1607 <P>perfect, thank you and have a nice day</P> Fri, 10 Nov 2023 10:19:52 GMT https://forums.autodesk.com/t5/hsm-post-processor-forum/add-angle-starting-synchronized-tapping-okuma/m-p/12368193#M1607 info 2023-11-10T10:19:52Z