topic Post processor for SCM morbidelli in HSM Post Processor Forum

Post processor for SCM morbidelli

mminamisawa — Wed, 21 Feb 2018 14:38:59 GMT

Does Anyone have the post processor for SCM morbidelli?

I am SCM tech Z5 user in Japan.
I've tried to post using SCM prisma which supplied in fusion360 post library.
but It does not work correctly on my CNC.
I think the "Z" should be possitive number for "morbidelli" machine.
but generic SCM postprocessor gives negative for Z.

I am not good english speaker.
I hope you undestand with your effort for my english.

Thanks,

Re: Post processor for SCM morbidelli

danielericciH72MZ — Wed, 29 Jan 2020 09:20:37 GMT

Hi,

have you solved your issue? i know this post are very old, but i'm tryng to build a post for an accord 40 from scm,

but all my works are with z positive, while my machine have z netative when the tool are into the piece...

i'm sorry for my bad english, i'm from italy.

Re: Post processor for SCM morbidelli

Marcelo.Ahlert1 — Tue, 16 Feb 2021 21:56:08 GMT

You could try this post I've edited to work with Maestro CNC from SCM

Re: Post processor for SCM morbidelli

mminamisawa — Wed, 17 Feb 2021 08:37:44 GMT

thank you!
I'll try it.

Re: Post processor for SCM morbidelli

nystrom.nils — Thu, 03 Feb 2022 11:37:35 GMT

Hi. Did it work? Im using a SCM tech z5

Re: Post processor for SCM morbidelli

mminamisawa — Sat, 05 Feb 2022 02:41:22 GMT

Yes, I confirmed it to work correctly 3axis.
I really appreciate to you gave PP. Thank you very much.
Although I don't check the 5axis movement yet, Does its PP suppport to 5axis?

Re: Post processor for SCM morbidelli

nystrom.nils — Sat, 05 Feb 2022 15:18:10 GMT

I get this "redefining arguments is deprecated" warning. Do you know what causes this problem?

Best regards

Re: Post processor for SCM morbidelli

nystrom.nils — Sun, 06 Feb 2022 14:28:19 GMT

Re: Post processor for SCM morbidelli

Marcelo.Ahlert1 — Mon, 07 Feb 2022 10:43:28 GMT

This Post is for 3 axis only, I believe the program you are trying to post is a 5 axis program, so the PP can't handle it.

It should work if you use it for 3 axis only.

Re: Post processor for SCM morbidelli

alan — Wed, 23 Feb 2022 11:59:10 GMT

Hi, will this PP work for a SCM ACCORD 20 (3-axis)?

Re: Post processor for SCM morbidelli

danielericciH72MZ — Thu, 24 Feb 2022 11:04:41 GMT

Hi, I'm trying to use the post processor.
My machine has the z axis inverted, when I elaborate a milling program with alphacam, I set negative z if the cutter is in the panel. How can I modify the post so that the machinings all have a negative z?
example: panel 1000x1000x18, pocket 5 mm deep, z = -5 mm in the xilog program.
thanks

Re: Post processor for SCM morbidelli

Marcelo.Ahlert1 — Thu, 24 Feb 2022 11:26:14 GMT

Hi, i've tested only on a Pratika, but it uses standard SCM code, you could test it with care on your machine

Re: Post processor for SCM morbidelli

Marcelo.Ahlert1 — Thu, 24 Feb 2022 11:30:28 GMT

I've made it work changing the "work depth note" in Maestro to Morbidelli (Z positive).

One thing i've not solved is the Reference stop, every program I post, ends up mirrored when imported to Maestro, if anyone knows how to solve this, would be of great help.

Re: Post processor for SCM morbidelli

Tomek.G — Thu, 24 Feb 2022 13:19:36 GMT

Hi @mminamisawa,

The newest SCM post from the library has a property to invert Z axis if necessary.

Re: Post processor for SCM morbidelli

mminamisawa — Thu, 24 Feb 2022 23:11:17 GMT

Thank you for telling it!
it is great update, isn't it.