topic Re: I need help with a 4th axis PP in HSM Post Processor Forum

I need help with a 4th axis PP

Anonymous — Sat, 21 Apr 2018 17:54:06 GMT

Hi all together

I am just a proud Owner of a 4th axis module.

I am drawing in Fusion 360. My mashine system is CNC Graf. It from a german developer and for me it is brand new.

All 2D contors I am going with a normal WIN CNC PP wich works super.

Now when I bought the 4th axis I had to learn that for these work I have to need another PP.

I had already some help in the German Fusion 360 forum but I have still problems.

The PP is already working well for engravement on round bodys but I am not able to drill.

When the drilling command comes thge mashine is doing wrong ways.

the router is moving from the right to the left instead of up and down.

Below you will find the links for the drawing and the PP which I am talking from.

May there is somebody who is able to find the mistake.

Thanks a lot for your help

Stefan

AchimN — Tue, 24 Apr 2018 10:23:50 GMT

Hi Stefan,

please look for the following setting into your post

  var tcp = true;

and change that to false:

  var tcp = false;

Anonymous — Thu, 26 Apr 2018 17:15:58 GMT

Hi Achim

thanks for your help.

Sorry , but I have no idea where I have to change this setup.

On the other side the Forum Member worked a lot on the PP and now it works very well.

There is only some modification necessary and I hope he will do that in near future.

Thanks again

Stefan