topic Re: Inventor HSM - postprocessor for Busellato Jet 6000 in HSM Post Processor Forum

Inventor HSM - postprocessor for Busellato Jet 6000

RUDYBERGAMO — Wed, 30 May 2018 15:58:39 GMT

Hello, in the forum i have found some post processor for Busellato machines, in particular these:

- Evolution-Busellato / 10123_Evolution_cnc_Busellato_M4x

- Evolution-Busellato / 10124_Genesis_cnc_Busellato_M4x

But i have a Busellato Jet 6000 and i would like to know if someone could please tell me where can i found its postprocessor.

I have made some test, and the only one that seems to works(not properly...i can se the preview of the 2D contour but the gcode read a lot of other code that does not interest the cnc process) is the first one.

Can anyone help me?
Thank you.

Re: Inventor HSM - postprocessor for Busellato Jet 6000

Marek_Skotak — Wed, 06 Jun 2018 12:34:35 GMT

Hi,

try this code.

https://www.dropbox.com/s/8mzdume5d3jtcdv/example_busellato.cnc?dl=0

Re: Inventor HSM - postprocessor for Busellato Jet 6000

RUDYBERGAMO — Thu, 07 Jun 2018 09:31:48 GMT

This works perfectly, it has the correct Z axis set up, and is setted also that if in second operation has the same Z coordinate(for example), the Z "form" in the machine software stay empty so this will take the previous operations...

Re: Inventor HSM - postprocessor for Busellato Jet 6000

Marek_Skotak — Thu, 07 Jun 2018 09:55:29 GMT

That is fine, i wrote this post not in ISO but in "albatros genesis object" .

Re: Inventor HSM - postprocessor for Busellato Jet 6000

RUDYBERGAMO — Thu, 07 Jun 2018 12:37:50 GMT

So then, how can i get it? Thank you

Re: Inventor HSM - postprocessor for Busellato Jet 6000

Marek_Skotak — Wed, 13 Jun 2018 20:30:08 GMT

Im programming and writing post code for a commercial purposes. If you will need it please contact me.