trying to output a different approach move with the tail stock on

Anonymous — Tue, 10 Jul 2018 15:46:21 GMT

i am trying to change to initial tool move when the tailstock is on

i look in the dump file and see this currentSection.tailstock=true

i added the red text to the post thinking i should see the output i am looking for

but i found out the if statement is ignored. not sure why.

if (insertToolCall) {

gMotionModal.reset();

if (currentSection.tailstock == "true") {

writeBlock(

gMotionModal.format(0), xOutput.format(initialPosition.x), yOutput.format(initialPosition.y));

writeBlock(zOutput.format(initialPosition.z));

}

if (properties.type == "A") {

writeBlock(

gMotionModal.format(0), xOutput.format(initialPosition.x), yOutput.format(initialPosition.y), zOutput.format(initialPosition.z)

);

} else {

writeBlock(

gAbsIncModal.format(90),

gMotionModal.format(0), xOutput.format(initialPosition.x), yOutput.format(initialPosition.y), zOutput.format(initialPosition.z)

);

}

2553: onSection()
currentSection.unit=1
currentSection.workOrigin=(0, 0, 0)
currentSection.workPlane=[[1, 0, 0], [0, 1, 0], [0, 0, 1]]
currentSection.wcsOrigin=(0, 0, 0)
currentSection.wcsPlane=[[1, 0, 0], [0, 1, 0], [0, 0, 1]]
currentSection.workOffset=1
currentSection.dynamicWCSOrigin=(0, 0, 0)
currentSection.dynamicWCSPlane=[[1, 0, 0], [0, 1, 0], [0, 0, 1]]
currentSection.dynamicWorkOffset=1
currentSection.fcsOrigin=(-6.15032e-21, 0, 0.095)
currentSection.fcsPlane=[[0, 1, 0], [0, 0, 1], [1, 0, 0]]
currentSection.type=1
currentSection.quality=0
currentSection.jetMode=0
currentSection.tailstock=true
currentSection.partCatcher=false

Re: trying to output a different approach move with the tail stock on

bob.schultz — Fri, 13 Jul 2018 20:49:07 GMT

You are treating the tailStock variable as a text string, since you added quotes around "true". This variable is a boolean and holds either true or false, not a text string. Change it to look like the following and it should work for you.

if (currentSection.tailstock) {

topic trying to output a different approach move with the tail stock on in HSM Post Processor Forum

trying to output a different approach move with the tail stock on

Re: trying to output a different approach move with the tail stock on