https://forums.autodesk.com/t5/hsm-post-processor-forum/linuxcnc-turning-lathe-post-processor-m3-m4-and-tool-side/m-p/8150485#M13939 <P>Hello</P><P>I'm trying to generate Gcode for my Lathe with LinuxCNC. I download LinuxCNC Turning postid:linuxcnc_turning.</P><P>I have tool on both sides of Z axis.The problem is my Fusion generate g code only with m3/m4 but tool don't change side.In code his always on "left side" Z axis.</P><P>&nbsp;</P><P>What wrong i'm doing?</P><P>Sorry for my English...</P> Tue, 24 Jul 2018 06:14:50 GMT Anonymous 2018-07-24T06:14:50Z https://forums.autodesk.com/t5/hsm-post-processor-forum/linuxcnc-turning-lathe-post-processor-m3-m4-and-tool-side/m-p/8150485#M13939 <P>Hello</P><P>I'm trying to generate Gcode for my Lathe with LinuxCNC. I download LinuxCNC Turning postid:linuxcnc_turning.</P><P>I have tool on both sides of Z axis.The problem is my Fusion generate g code only with m3/m4 but tool don't change side.In code his always on "left side" Z axis.</P><P>&nbsp;</P><P>What wrong i'm doing?</P><P>Sorry for my English...</P> Tue, 24 Jul 2018 06:14:50 GMT https://forums.autodesk.com/t5/hsm-post-processor-forum/linuxcnc-turning-lathe-post-processor-m3-m4-and-tool-side/m-p/8150485#M13939 Anonymous 2018-07-24T06:14:50Z