topic Re: LinuxCNC - 5 axis continous - Swarf operation in HSM Post Processor Forum

LinuxCNC - 5 axis continous - Swarf operation

Anonymous — Wed, 19 Sep 2018 22:10:18 GMT

Hi! I work with a 5 axis CNC machine with LinuxCNC and I have a problem with the SWARF operation in post processor.

When I use Swarf operation in a face, Post Processor (LinuxCNC) change Y axis with X axis.

I attached two image to describe the problem.

In the first one there is the Swarf operation in the correct face, but in the other image (the toolpath simulator) you can see that the operation is incorrect direction.

How can I risolve it?

Thank you!

Re: LinuxCNC - 5 axis continous - Swarf operation

Laurens-3DTechDraw — Thu, 20 Sep 2018 06:54:53 GMT

Is your LinuxCNC configured for TCP?

Re: LinuxCNC - 5 axis continous - Swarf operation

Anonymous — Thu, 20 Sep 2018 18:34:19 GMT

Yes!

Re: LinuxCNC - 5 axis continous - Swarf operation

Anonymous — Thu, 20 Sep 2018 19:09:34 GMT

I've changed

optimizeMachineAngles2(1); // TCP enabled

optimizeMachineAngles2(0); // TCP enabled

and it works! Thank you!