DMS 5-Axis Post Processor

Anonymous — Wed, 24 Oct 2018 16:31:21 GMT

Revisiting this from awhile back,

a little info about the machine: 5-Axis DMS Router, Head/Head 4th-5th axis. B-axis rotates over y-axis, and C-axis rotates around the Z-axis.

Fusion 360 CAM

Problem:

The post is outputting the orientation of the WCS relative to the orientation of the C-Axis.

Example: when C-Axis is rotated 90 degrees, it appears the WCS will also rotate 90 degrees. I've attached a ScreenCast(https://autode.sk/2O40ySm) of the setup, post options and post processor output.

.cps file attached.

I was having issues with orientation of the C-Axis and B-Axis relative to machine parameters, I believe that issue has been fixed, however, I do not know where/what to modify to lock in the WCS reference orientation during the rotation of the 4th and 5th axis.

topic DMS 5-Axis Post Processor in HSM Post Processor Forum

DMS 5-Axis Post Processor