topic Re: correct post for HAAS ngc st15 lathe in HSM Post Processor Forum

correct post for HAAS ngc st15 lathe

johnptc314159 — Tue, 27 Nov 2018 02:36:16 GMT

I am trying to find the best choice for a post to use with fusion 360 for a HAAS ngc st15. there is a post mis labeled ST15 but it is for a ST15Y. The difference being it includes the Y axis, C axis and of course live tooling.

I need one for the st15, barfeeder and tail stock. NO c-axis y-axis or live tooling. I dont mind editing the post but I am not sure how to correct the st15Y post to work for the st15 ( not mill turn.....)

thanks

john

Re: correct post for HAAS ngc st15 lathe

AchimN — Tue, 27 Nov 2018 13:50:35 GMT

This post processor should be the better choice to start with:

https://cam.autodesk.com/hsmposts?p=haas_turning

Re: correct post for HAAS ngc st15 lathe

ptcjohn — Tue, 27 Nov 2018 16:14:24 GMT

I will try it this morning.....many thanks........let you know how we do 🙂

Re: correct post for HAAS ngc st15 lathe

ptcjohn — Tue, 27 Nov 2018 16:51:06 GMT

it runs on my computer. however there is not a list at the top of the needed tools........always something !!

I guess i can try a setup sheet 🙂

off to try it on the lathe

Re: correct post for HAAS ngc st15 lathe

ptcjohn — Wed, 28 Nov 2018 18:45:50 GMT

all working fine.... thanks

had to edit out the chip auger command from it 🙂