topic Re: MecaNumeric Pro 4020 and MultiCut 3000 post processor request in HSM Post Processor Forum

MecaNumeric Pro 4020 and MultiCut 3000 post processor request

Anonymous — Wed, 28 Nov 2018 11:52:06 GMT

Hello everyone!

I have a problem with post processors.

We have 2 CNC milling machines: MecaNumeric Pro 4020 and MultiCut 3000 with working surface 3050х2050.

We want to move from using ArtCam 2012 to Fusion 360

We use post processors in ArtCam 2012:

1. mecanumeric.opt for MecaNumeric Pro 4020

2. gcode_mm.con for MultiCut 3000

I cannot find suitable post processors for the Fusion 360. Also I can not load the current post processors that i used in ArtCam 2012.

Can anyone suggest a suitable post processor for these machines? Or send a post processor? Or advise who to contact?

Best regards, Georgy

Anonymous — Wed, 28 Nov 2018 12:56:24 GMT

Update:

Control system for MultiCut 3000 is WEIHONG NK 105

Anonymous — Sat, 01 Dec 2018 12:40:26 GMT

Update
Post processor for MultiCut 3000 found. Everything works fine.

But i can't find post for Meca. Our Meca Numeric Pro 4020 is already 15 years old. Control system - CN5000.

Help me find the post processor for MecaNumeric POWER AUTOMATION CN5000 please

serge.quiblier — Thu, 09 Jul 2020 16:49:34 GMT

Hello @Anonymous

We have updated our PowerAutomation post.

The Mecanumeric is using this brand of controller.

If your are willing to test it :

I am warning you that the post output had not been tested on a machine, it's a generic PowerAutomation post.

The Mecanumeric may require some machine builder specific codes.

So use it with care, and don't hesitate to provide feedback

Regards

Anonymous — Wed, 24 Mar 2021 10:51:23 GMT

hi friend im looking for cn5000 post processor too

have you find it?

thanks a lot is very important and hurry for me please