topic Re: post processor for biesse elix in HSM Post Processor Forum

post processor for biesse elix

Anonymous — Fri, 24 May 2019 00:22:25 GMT

Hi need help with modifying a biesse post processor for our Biesse Elix Dowel machince.

the sample below is a program created by microvellum, I would like to have a post for fusion 360. can anyone help me with this.

[COMMENTO]

[CENTRO01]

PARAMETRI=000000247
UTENSILI=000000308
CONTORNATURA=000000323
FORATURA=000000448
TABELLEFORI=000000463
LABELC=000000481
LABELF=000000494
CONFASSIST=000000507
ATTREZZAGGIO=000000524
CUSTOMSEZ=000000543
SEIFERT=000000559

[PARAMETRI01]
N10 LX=101.600 LY=876.300 LZ=19.050 G71 HC=1
%
[UTENSILI01]
%
[CONTORNATURA01]
N20 QX=32.000 QZ=9.525 QDU=8.000 QCOL=1 QSPI=1 L=G99
N30 QX=69.698 QZ=9.525 QDU=8.000 QCOL=1 QSPI=1 L=G99
%
[FORATURA01]
%
[TABELLEFORI01]
%
[LABELC01]
%
[LABELF01]
%
[CONFASSIST01]
%
[ATTREZZAGGIO01]
%
[CUSTOMSEZ01]
%
[SEIFERT01]
%
[]

Re: post processor for biesse elix

Boopathi_Sivakumar — Fri, 24 May 2019 04:26:33 GMT

@Anonymous

Did you tried the generic post processor which is available with the HSM post library

Posting out your codes with this post processor and if you already have the working codes compare with that file , and if it is ok then proceed the code with your machine run through block by block.

Poke us if any error or changes required

Thanks,
Boopathi

Re: post processor for biesse elix

grigorov.rv — Tue, 28 May 2019 13:55:18 GMT

Maybe I can help you email me.

Re: post processor for biesse elix

Anonymous — Tue, 28 May 2019 13:58:14 GMT

Hi,

Please let me know what you need me to provide for you to help me with setting up this particular post.

Thank you

Re: post processor for biesse elix

Anonymous — Tue, 28 May 2019 14:30:23 GMT

I did,

but i am not sure exactly what sections i need to modify so the dowel machine understands it.

Re: post processor for biesse elix

Anonymous — Thu, 30 May 2019 23:33:10 GMT

email me if you can help me with the post processor for the Elix

illuminatetrix@gmail.com