topic Re: Remote Fusion instance access (license question) in Fusion Hub, Data & Project Management Forum

Remote Fusion instance access (license question)

o.yefimov — Mon, 26 Feb 2024 07:06:27 GMT

Dear Autodesk community

Could you please help me clarify a concern

Am I able to use a single license of Fusion 360 on Device A and access it through the RDP protocol from another device, Device B, in the morning, and then from a different device, Device C, in the evening?

Re: Remote Fusion instance access (license question)

brian.mark — Mon, 26 Feb 2024 21:42:00 GMT

@o.yefimov I'll see if I can find out for you, but you might have more luck asking in the Fusion Support forum.

Re: Remote Fusion instance access (license question)

brian.mark — Mon, 26 Feb 2024 21:47:23 GMT

@o.yefimov You are fine using Fusion in the way you described. You are allowed to access from many devices, as long as it is not concurrent.

Re: Remote Fusion instance access (license question)

o.yefimov — Thu, 29 Feb 2024 11:19:33 GMT

Thank you
"I have another small extension to this question. Would I be violating the license if I have a server with a purchased license and access it via Remote Desktop Protocol (RDP) and I access it in the morning or in the evening, and another engineer accesses it at night (all accesses occur at different times, via RDP, with no parallel access)?

Re: Remote Fusion instance access (license question)

o.yefimov — Thu, 29 Feb 2024 11:20:25 GMT

Thank you
"I have another small extension to this question. Would I be violating the license if I have a server with a purchased license and access it via Remote Desktop Protocol (RDP) and I access it in the morning or in the evening, and another engineer accesses it at night (all accesses occur at different times, via RDP, with no parallel access)?

Re: Remote Fusion instance access (license question)

brian.mark — Thu, 29 Feb 2024 18:35:48 GMT

@o.yefimov While this would technically work, I can't confirm that it is against the Terms and Conditions as I am not with licensing or legal. The Autodesk general Terms and Conditions can be found here:
https://www.autodesk.com/company/terms-of-use/en/general-terms

Re: Remote Fusion instance access (license question)

o.yefimov — Mon, 04 Mar 2024 15:54:31 GMT

Thank you for your time. I have read all the terms and didn't find any violations, but I want to make sure everything is correct. Could you please redirect me to someone who can confirm if it's legal according to the license terms?

Re: Remote Fusion instance access (license question)

brian.mark — Mon, 04 Mar 2024 16:48:01 GMT

@o.yefimov As this forum is for trouble shooting issues with Fusion Team, you may be better served by contacting support via this link (https://knowledge.autodesk.com/contact-support?utm_source=forum-siderail&utm_medium=webpage&utm_campaign=support-downloads&_ga=2.169468645.51270214.1709558809-59a4bf92-1f6c-5b1a-7818-1847038d7c63) and contacting your own lawyer.