topic Re: Flare around cylinders base in Fusion Support Forum

Flare around cylinders base

oxicottin — Mon, 26 Oct 2020 23:24:22 GMT

Hello, I'm new to drawling like this so please bare with me 😋. I need to create a flare around 2 cylinders bottoms. They intersects with a second cylinder, the image is attached. I cant for the life of me figure out how to do that?

here is my project:

https://a360.co/3orMdmd

Thanks chad

Re: Flare around cylinders base

jhackney1972 — Tue, 27 Oct 2020 00:40:23 GMT

You show a link to your project but you forgot to allow download.

Re: Flare around cylinders base

oxicottin — Tue, 27 Oct 2020 01:13:06 GMT

It wont let me without a subscription.... Which I have the free version not the paid so I think im outa luck there!

I did doenload a stl. and attached though.

Re: Flare around cylinders base

jhackney1972 — Tue, 27 Oct 2020 01:17:15 GMT

If that is the case, you can always share your Fusion 360 model by opening it up, go to the File menu, select Export and save it to your hard drive. Then you can attach it to the Attachment section of any forum post.

Re: Flare around cylinders base

seth.madore — Tue, 27 Oct 2020 09:07:03 GMT

@jhackney1972 yeah, the Personal Entitlement is restricted in this department. I've stopped asking for the A360 link and just went straight to requesting the .f3s/.f3z model

Re: Flare around cylinders base

oxicottin — Tue, 27 Oct 2020 21:12:08 GMT

@jhackney1972 @seth.madore

Ok I'm sorry guys/gals im learning not only 356 im learning how to post.... I needed to do two things left and have no idea on how to do either. Is this the correct forum to post questions?

1) I need to create a "Flare" around cylinder(s) ends.

2) I need to widen the hole in the top like in the image.

Re: Flare around cylinders base

jhackney1972 — Tue, 27 Oct 2020 22:45:37 GMT

This is the best I can do with your model. I have no idea how to get a flare around the side-to-main pipe due to the intersection to the top connection body. You did not give any dimensions for the top cutout so I just used something that looked good. My attempt is attached.

Re: Flare around cylinders base

oxicottin — Tue, 27 Oct 2020 23:20:32 GMT

@jhackney1972 Would you be able to do a screencast of how you did the hole? Thanks!!

Re: Flare around cylinders base

jhackney1972 — Tue, 27 Oct 2020 23:38:38 GMT

Here you go.

Re: Flare around cylinders base

oxicottin — Tue, 27 Oct 2020 23:46:17 GMT

@jhackney1972 Than you so much now i can play around with it!