https://forums.autodesk.com/t5/fusion-support-forum/trouble-projecting-sketch/m-p/9828731#M99734 <P>In the attached file, I'd like to project the Panel sketch onto the XY plane to get a clean sketch of just the outline of the panel and all the holes, but none of the dimensions and construction lines, so I can export a DXF for lasercutting.&nbsp; I've done this with this sketch before, but now I can't for some reason.&nbsp; I must be forgetting something.</P><P>&nbsp;</P><P>I start by creating a new sketch and selecting the XY plane, then hitting P.&nbsp; Previously, at this point I thought I could just click somewhere within the panel to select everything I want, but now that doesn't select anything; I have to select each individual piece of geometry which would take forever.&nbsp; What am I doing wrong?</P> Wed, 28 Oct 2020 01:08:24 GMT karl 2020-10-28T01:08:24Z https://forums.autodesk.com/t5/fusion-support-forum/trouble-projecting-sketch/m-p/9828731#M99734 <P>In the attached file, I'd like to project the Panel sketch onto the XY plane to get a clean sketch of just the outline of the panel and all the holes, but none of the dimensions and construction lines, so I can export a DXF for lasercutting.&nbsp; I've done this with this sketch before, but now I can't for some reason.&nbsp; I must be forgetting something.</P><P>&nbsp;</P><P>I start by creating a new sketch and selecting the XY plane, then hitting P.&nbsp; Previously, at this point I thought I could just click somewhere within the panel to select everything I want, but now that doesn't select anything; I have to select each individual piece of geometry which would take forever.&nbsp; What am I doing wrong?</P> Wed, 28 Oct 2020 01:08:24 GMT https://forums.autodesk.com/t5/fusion-support-forum/trouble-projecting-sketch/m-p/9828731#M99734 karl 2020-10-28T01:08:24Z https://forums.autodesk.com/t5/fusion-support-forum/trouble-projecting-sketch/m-p/9828901#M99735 <P>Never mind.&nbsp; I remembered I needed to do an extrude to get a clean surface first, then project that onto the plane.&nbsp; All's good now.</P> Wed, 28 Oct 2020 04:08:01 GMT https://forums.autodesk.com/t5/fusion-support-forum/trouble-projecting-sketch/m-p/9828901#M99735 karl 2020-10-28T04:08:01Z