topic Re: Extrude feature showing strange behaviour. in Fusion Support Forum

Extrude feature showing strange behaviour.

blaisebarrette — Sat, 31 Oct 2020 16:31:00 GMT

Hi!

Unfortunately, there's no audio on the screencast but hopefully you can see the behaviour.

It only seem to do this when using "Start" > "From object" option with more than one profile selected. Also the bug shows if in the "Extent" option, either "All" or "To object" is selected.

Hope this helps. Thanks!

- Blaise

Re: Extrude feature showing strange behaviour.

jhackney1972 — Sat, 31 Oct 2020 17:48:58 GMT

Please attach you model so the forum users can take a look for themselves.

Re: Extrude feature showing strange behaviour.

blaisebarrette — Sat, 31 Oct 2020 18:53:39 GMT

I just applied the latest Fusion update and I can no longer replicate the bug!

That was fast! Hahaha!!!

Thank you!

- Blaise

Re: Extrude feature showing strange behaviour.

blaisebarrette — Sat, 31 Oct 2020 19:09:18 GMT

Ok... I actually managed to replicate it! 😞

Open the last extrude feature in the timeline and add the last profile to the selection and the bug should come up.

I am using a Mac with the latest version of Fusion in case this is relevant.

- Blaise

Add this bottom face to the selected profiles

Re: Extrude feature showing strange behaviour.

jhackney1972 — Sat, 31 Oct 2020 20:47:57 GMT

I am not arguing that you can make the extrusion fail but there are many ways to achieve the same result without failure. The main way is to change the order of modeling, by creating the circular pattern AFTER the modification extrusion is done on one or better yet go back in the timeline and modify the third extrusion then edit the pattern to include the fillets. You can also, in the model's present condition, perform the same extrusion twice, once with five of the small pockets and then the final one or any other count combination.

@jeff_strater what is your opinion?

Re: Extrude feature showing strange behaviour.

blaisebarrette — Sat, 31 Oct 2020 21:08:51 GMT

Of course, it can be done in many ways other than this but this is not the point of this post.

I found this repeatable bug and just wanted to point it out so it can be fixed in a future update.

Thanks!

- Blaise

Re: Extrude feature showing strange behaviour.

jeff_strater — Tue, 03 Nov 2020 00:28:09 GMT

yes, this is a bug. Thanks for reporting it @blaisebarrette ! The bug is FUS-74297