https://forums.autodesk.com/t5/fusion-support-forum/warning-no-passes-to-link-warning-empty-toolpath/m-p/9838875#M99248 <P>I've created my first cam setup. I want to put a chamfer on a piece of 25.4mm steel rod with a ball endmill. Very little material needs to be removed. I can't decipher the two warnings. I haven't a clue where to look for the problem. No video really explains the issue. Should I post a file or something? Thanks.</P> Mon, 02 Nov 2020 00:51:04 GMT nikkiY58Q3 2020-11-02T00:51:04Z https://forums.autodesk.com/t5/fusion-support-forum/warning-no-passes-to-link-warning-empty-toolpath/m-p/9838875#M99248 <P>I've created my first cam setup. I want to put a chamfer on a piece of 25.4mm steel rod with a ball endmill. Very little material needs to be removed. I can't decipher the two warnings. I haven't a clue where to look for the problem. No video really explains the issue. Should I post a file or something? Thanks.</P> Mon, 02 Nov 2020 00:51:04 GMT https://forums.autodesk.com/t5/fusion-support-forum/warning-no-passes-to-link-warning-empty-toolpath/m-p/9838875#M99248 nikkiY58Q3 2020-11-02T00:51:04Z https://forums.autodesk.com/t5/fusion-support-forum/warning-no-passes-to-link-warning-empty-toolpath/m-p/9839779#M99249 <P>Hi!</P> <P>When posting to the forums, a file does a lot more for us than a description. Unless it's under NDA, please share the file here:<BR />File &gt; Export &gt; Save to local folder. Return to thread and attach the .f3d file in your reply</P> Mon, 02 Nov 2020 12:15:53 GMT https://forums.autodesk.com/t5/fusion-support-forum/warning-no-passes-to-link-warning-empty-toolpath/m-p/9839779#M99249 seth.madore 2020-11-02T12:15:53Z