topic Re: Measure the position of a transformed plane/ feature in XYZ &amp;ABC CO ORDINATE RELAIVE TO THE PART ORIGIN in Fusion Support Forum https://forums.autodesk.com/t5/fusion-support-forum/measure-the-position-of-a-transformed-plane-feature-in-xyz-amp/m-p/9859727#M98686 <P>In order to measure an angle, you need to pick either a line or plane for both picks. You have selected the center point that has no plane.</P> <P>&nbsp;</P> <P>Select the feature face, then select the XZ plane. That will show the angle.</P> Tue, 10 Nov 2020 18:47:39 GMT Phil.E 2020-11-10T18:47:39Z Measure the position of a transformed plane/ feature in XYZ &ABC CO ORDINATE RELAIVE TO THE PART ORIGIN https://forums.autodesk.com/t5/fusion-support-forum/measure-the-position-of-a-transformed-plane-feature-in-xyz-amp/m-p/9859523#M98685 <P>Hi, i need help measuring the location of a feature on the part relative to the parts origin i need the XYZ &amp; rotation of the feature in around the XYZ.&nbsp;</P> Tue, 10 Nov 2020 17:43:11 GMT https://forums.autodesk.com/t5/fusion-support-forum/measure-the-position-of-a-transformed-plane-feature-in-xyz-amp/m-p/9859523#M98685 themikevdw 2020-11-10T17:43:11Z Re: Measure the position of a transformed plane/ feature in XYZ &ABC CO ORDINATE RELAIVE TO THE PART ORIGIN https://forums.autodesk.com/t5/fusion-support-forum/measure-the-position-of-a-transformed-plane-feature-in-xyz-amp/m-p/9859727#M98686 <P>In order to measure an angle, you need to pick either a line or plane for both picks. You have selected the center point that has no plane.</P> <P>&nbsp;</P> <P>Select the feature face, then select the XZ plane. That will show the angle.</P> Tue, 10 Nov 2020 18:47:39 GMT https://forums.autodesk.com/t5/fusion-support-forum/measure-the-position-of-a-transformed-plane-feature-in-xyz-amp/m-p/9859727#M98686 Phil.E 2020-11-10T18:47:39Z