topic Re: Solidworks Mouse Commands Not Responding in Fusion Support Forum

Solidworks Mouse Commands Not Responding

oldtbone55 — Tue, 10 Nov 2020 19:54:36 GMT

I have been working with Fusion using Solidworks mouse commands and suddenly they no longer respond. If I go in and change my preferences to Fusion the mouse works per the Fusion preferences. This also happened to occur while I was having issues with Fusion commands hanging up. Is this because I have a personal license? Everything seemed to be working fine before.

Thanks.

Re: Solidworks Mouse Commands Not Responding

jodom4 — Wed, 11 Nov 2020 23:30:10 GMT

Hey oldtbone55,

Your license type has no effect on F360's performance- this sounds like a bug to me. I've escalated the case as a bug report.

Re: Solidworks Mouse Commands Not Responding

oldtbone55 — Thu, 12 Nov 2020 02:28:23 GMT

Thanks very much.

😁

Re: Solidworks Mouse Commands Not Responding

oldtbone55 — Tue, 17 Nov 2020 19:29:11 GMT

Hi There, just wondering if there's been any development with this issue?

Thanks.

Re: Solidworks Mouse Commands Not Responding

jodom4 — Thu, 14 Jan 2021 19:55:37 GMT

Hey oldtbone55,

I talked to one of our QC engineers about your issue. He's going to test it, but he suspects you're experiencing a mouse hardware issue.

If you're using a Logitech mouse, the wheel can tilt right and left and that’s normally the cause of middle mouse button issues. If you shut off the tilt feature in the Logitech drivers it should solve the problem.

Re: Solidworks Mouse Commands Not Responding

oldtbone55 — Thu, 14 Jan 2021 20:09:07 GMT

Thanks Kindly for the quick reply Jonathan. I do have a Logitech Mouse so maybe that's the problem. I'll do as you've suggested and see if that works.

Cheers!

Re: Solidworks Mouse Commands Not Responding

oldtbone55 — Fri, 15 Jan 2021 00:51:19 GMT

Have to correct my last statement. I have a Microsoft mouse.