topic Re: Editing a T-Spline or Surface after using solid tools in Fusion Support Forum

Editing a T-Spline or Surface after using solid tools

Anonymous — Mon, 16 Nov 2020 01:40:11 GMT

Hey all,

Newbie question here. I'm making a facemask that has a freeform, rather amorphous shape and thus I have to use the T-Spline tools. However, my model also has some hardware cutouts that have to be done with the solid modelling tools. My issue is that I can't figure out how to setup my Form so that I can push-pull edit the mask shape without deleting the design history. Please advise, and thanks in advance! (Pic below for reference).

Re: Editing a T-Spline or Surface after using solid tools

jeff_strater — Mon, 16 Nov 2020 17:52:11 GMT

@Anonymous - can add some more details about what you are trying to do when you say "so that I can push-pull edit the mask shape without deleting the design history."? Are you trying to go back and edit the T-Spline form? Or, are you expecting that the Press/Pull command can work in the Solid environment? I would not expect to be able to do anything meaningful in the Solid environment. But, you should be able to edit the Form feature and modify the shape in the T-Spline environment, and on exit, all your cutouts should compute based on the newly edited result.

Re: Editing a T-Spline or Surface after using solid tools

Anonymous — Wed, 18 Nov 2020 21:27:02 GMT

Hi Jeff,

Thank so much for the timely response! Yes, I'm trying to go back and edit the T-Spline itself. I was able to do this in a new file, however, in my current one it doesn't seem to work. I have a thickened T-Spline body, and when I select capture design history, it automatically converts to a solid. Once there, I can't seem to edit the T-Spline without turning off design history. I'm fully aware that this is probably user error haha. Thanks so much for your help.

Re: Editing a T-Spline or Surface after using solid tools

jeff_strater — Wed, 18 Nov 2020 21:37:06 GMT

can you share the design here? Not really sure what the problem would be from that description. If the design was not history-based in the beginning, there may be issues with trying to convert it to be history-based, but I'm not certain. If we can see the file, it will help a lot. Thanks.

Re: Editing a T-Spline or Surface after using solid tools

Anonymous — Wed, 18 Nov 2020 21:47:11 GMT

Absolutely, here you go:

Re: Editing a T-Spline or Surface after using solid tools

jeff_strater — Wed, 18 Nov 2020 21:56:50 GMT

Thanks, @cjtman.theriault - this design looks OK to me - I'm able to edit the T-Spline by just right clicking and choosing "Edit", making modifications, then exiting from the Form environment. This is how I expect a history-based design to work, so the conversion from a Direct Model seems to be OK.

Re: Editing a T-Spline or Surface after using solid tools

Anonymous — Wed, 18 Nov 2020 22:10:42 GMT

Got it, thanks! I was missing the fact that the T-Spline body is accessible in the newly created design history. Thanks so much!