https://forums.autodesk.com/t5/fusion-support-forum/new-thread-dimensioning-tool-gives-incorrect-callout/m-p/9950268#M95251 <P>I figured out the problem, thanks</P> Sat, 19 Dec 2020 01:02:40 GMT kevin399ML 2020-12-19T01:02:40Z https://forums.autodesk.com/t5/fusion-support-forum/new-thread-dimensioning-tool-gives-incorrect-callout/m-p/9950265#M95250 <P>One of the recent updates now includes and hole and thread note option on the text tool in the drawing space. This is a great new feature, however, I am working on a drawing fora part with a 1/2-13 UNC threaded hole and this new tool is calling out the thread as 1/2-12 UNS. I've gone back and checked the model a couple times and can't figure out why this is happening, so I am guessing that its a bug with this new tool. Is anyone here aware of something I might be missing or doing incorrectly? Thanks</P> Sat, 19 Dec 2020 00:58:54 GMT https://forums.autodesk.com/t5/fusion-support-forum/new-thread-dimensioning-tool-gives-incorrect-callout/m-p/9950265#M95250 kevin399ML 2020-12-19T00:58:54Z https://forums.autodesk.com/t5/fusion-support-forum/new-thread-dimensioning-tool-gives-incorrect-callout/m-p/9950268#M95251 <P>I figured out the problem, thanks</P> Sat, 19 Dec 2020 01:02:40 GMT https://forums.autodesk.com/t5/fusion-support-forum/new-thread-dimensioning-tool-gives-incorrect-callout/m-p/9950268#M95251 kevin399ML 2020-12-19T01:02:40Z