topic Re: whenever I try to move the object its getting freeze in Fusion Support Forum

whenever I try to move the object its getting freeze

Anonymous — Sat, 19 Dec 2020 15:31:46 GMT

I am new to fusion and working on a project watch winding machine,

as shown in the image whenever I try to move the watch stand to the case it's not allowing me to move and fusion getting freeze for a couple of minutes I don't know how to solve this.

pls help me solve this I am planning to print this due to the error I cant able to finalize the design

Re: whenever I try to move the object its getting freeze

wmhazzard — Sat, 19 Dec 2020 15:49:59 GMT

Please attach an f3d file of your model.

Re: whenever I try to move the object its getting freeze

Anonymous — Sat, 19 Dec 2020 16:12:53 GMT

I have attache the F3D file with this

Re: whenever I try to move the object its getting freeze

wmhazzard — Sat, 19 Dec 2020 18:31:46 GMT

I don't know the exact cause of your problem but there are many warnings in your timeline that you need to address and fix as when they go unfixed they can cause problems like this. Also moving components into place is not good practice, either build the components in the place that they need to be or use a joint to place the components. The problem that you are having might come from one of the yellow warnings along with one of the previous moves. It could stem from one of the gears as they have a large number of faces which need many calculations. The large gear is also interfering with the housing.

Re: whenever I try to move the object its getting freeze

jeff_strater — Sun, 20 Dec 2020 01:55:34 GMT

The problem is the use of Contact Set. Contact is a very compute-intensive operation - I don't recommend it for complex geometry, or for lots of components/bodies. If you disable Contacts, you can move this component just fine.

Re: whenever I try to move the object its getting freeze

Anonymous — Sun, 20 Dec 2020 09:18:27 GMT

thanks a lot its really works

you save me the day

Re: whenever I try to move the object its getting freeze

Anonymous — Sun, 20 Dec 2020 09:20:07 GMT

thanks for your help and Hint

noted and try to clear the errors