https://forums.autodesk.com/t5/fusion-support-forum/manucafturing-giving-me-a-headache/m-p/9960184#M94972 <P>Your file has one toolpath in it, which appears to be behaving as expected. What exactly is the issue?</P> Thu, 24 Dec 2020 13:24:59 GMT seth.madore 2020-12-24T13:24:59Z https://forums.autodesk.com/t5/fusion-support-forum/manucafturing-giving-me-a-headache/m-p/9959349#M94971 <P>I can't seem to make anything work, from pocket clearing to adaptive clearing.</P><P>Trying to machine this gift for a friend tomorrow so any help would be appreciated</P><P>the tool paths always seem to be off even if I manage to make it do anything somehow.</P><P>&nbsp;</P><P>I have to machine both sides, the first test run came out alright but i forgot to machine some faces.</P> Wed, 23 Dec 2020 22:46:58 GMT https://forums.autodesk.com/t5/fusion-support-forum/manucafturing-giving-me-a-headache/m-p/9959349#M94971 Anonymous 2020-12-23T22:46:58Z https://forums.autodesk.com/t5/fusion-support-forum/manucafturing-giving-me-a-headache/m-p/9960184#M94972 <P>Your file has one toolpath in it, which appears to be behaving as expected. What exactly is the issue?</P> Thu, 24 Dec 2020 13:24:59 GMT https://forums.autodesk.com/t5/fusion-support-forum/manucafturing-giving-me-a-headache/m-p/9960184#M94972 seth.madore 2020-12-24T13:24:59Z https://forums.autodesk.com/t5/fusion-support-forum/manucafturing-giving-me-a-headache/m-p/9961572#M94973 <P>Disregard that toolpath, my toolpath patterns were not alligned with any operation or wouldn't form propperly, very likely a mistake on my end, I'll look into it when I got more time on my hands.</P> Fri, 25 Dec 2020 13:47:50 GMT https://forums.autodesk.com/t5/fusion-support-forum/manucafturing-giving-me-a-headache/m-p/9961572#M94973 Anonymous 2020-12-25T13:47:50Z