topic Re: learning from tutorial in Fusion Support Forum

learning from tutorial

Anonymous — Thu, 24 Dec 2020 20:19:26 GMT

hi guys ive been learning from a tutorial on sheet metal. but when i come to unfold part at the end its not doing it.

as far as i can see ive done all the correct instructions. but im stuck now. can anyone help

360 LIVE: Creating HVAC parts in Fusion 360 Sheet Metal

Re: learning from tutorial

davebYYPCU — Thu, 24 Dec 2020 20:32:37 GMT

Flat Pattern, or Unfold? Both should work.

Will need the file for review,

File > Export, and attach it, if you wish.

Re: learning from tutorial

Anonymous — Thu, 24 Dec 2020 20:38:36 GMT

Ok I will send file many thanks

Re: learning from tutorial

Anonymous — Thu, 24 Dec 2020 20:55:45 GMT

hi here is the file.

Re: learning from tutorial

TheCADWhisperer — Thu, 24 Dec 2020 22:19:15 GMT

What is the link to the tutorial?

None of your sketches are fully defined?

Your arcs are not equal length?

This was published before Convert to Sheet Metal existed.

https://www.youtube.com/watch?v=r5GYe1HINB4

Re: learning from tutorial

Anonymous — Thu, 24 Dec 2020 22:22:07 GMT

https://youtu.be/oGwn6SsyPwA

here is the link , ive just copied exactly what an autodesk instructor has done.

Re: learning from tutorial

TheCADWhisperer — Thu, 24 Dec 2020 23:15:06 GMT

Examine the Attached file.

Re: learning from tutorial

Anonymous — Thu, 24 Dec 2020 23:31:31 GMT

Thats intresting beacuse your lofting is quite different. but looks a better way. it would be good to see if i could get more bend lines in to your way?

Re: learning from tutorial

Anonymous — Thu, 24 Dec 2020 23:32:52 GMT

also many thanks for your time. you have been a great help.

Re: learning from tutorial

davebYYPCU — Fri, 25 Dec 2020 00:06:46 GMT

I agree with you the file supplied will not Flat Pattern or Unfold.

Some testing edits could not fix it.

Might not help...