topic Re: Shell command in Fusion Support Forum

Shell command

E_SADRIA — Sun, 17 Jan 2021 19:50:07 GMT

Hey Guys,

Don't undersstand why i cant't shel my component...?
Any ideas?

Re: Shell command

jhackney1972 — Sun, 17 Jan 2021 20:02:21 GMT

The forum users have to be able to see your component. Please attach your Fusion 360 model. If you do not know how to attach your model, open it in Fusion360, select the File menu and then choose Export and save the .F3D file to your hard drive. Then use the Attachments section of a reply forum post to attach it.

Re: Shell command

jhackney1972 — Sun, 17 Jan 2021 22:16:43 GMT

It has been over 2 hours since I asked you to attach your model. Do you still need assistance, do you need help attaching your model. Probably you asked the question, left your computer with it logged in and watching the football playoffs.

Re: Shell command

E_SADRIA — Mon, 18 Jan 2021 08:50:35 GMT

@jhackney1972 so wird i attached it in the the first place, apparenty it didn't work.

Sorry i left you hanging...

Re: Shell command

TrippyLighting — Mon, 18 Jan 2021 11:49:08 GMT

Can you provide a better explanation of what you are trying to accomplish ?

There are two componets in the design,. Which one do you have the problem with and how thick do you waht the shell to be ?

Re: Shell command

E_SADRIA — Mon, 18 Jan 2021 12:51:38 GMT

I am trying two shell the half circle in the second component

Re: Shell command

TrippyLighting — Mon, 18 Jan 2021 12:58:52 GMT

And you only answered half of the question 😉

How thick ?

Re: Shell command

E_SADRIA — Mon, 18 Jan 2021 13:02:04 GMT

I am really showing my worst side here sorry for that 🙂

0.43 mm

Re: Shell command

TrippyLighting — Mon, 18 Jan 2021 13:06:52 GMT

Can you provide a hand sketch of what you want for the geometry to look like ?

The thing is only .42 mm thick. How would you want to shell ot to a wall thickness of .43 mm, unless you want to shell it to the outside ?

Is this what you want ?

Re: Shell command

E_SADRIA — Mon, 18 Jan 2021 13:15:00 GMT

Thats true. Maybe a shell thichness of 0.1, exact as in the screenshot just bigger 🙂

But why cant i shell? what did i miss?

Re: Shell command

TrippyLighting — Mon, 18 Jan 2021 13:26:58 GMT

Re: Shell command

E_SADRIA — Mon, 18 Jan 2021 13:38:20 GMT

So i need to define it as a new body...